Almost warm hands

The current series of blog posts is focusing on hands. OK. The last one and this one is not exactly a series. But on this little blog, it’s close. My last post was all about mittens. This one is all about mittens that are missing their fingertips. They’re almost as warm as mittens.

These are Aimee Alexander’s Farm to Market Mitts. I’ve posted about Farm to Market a number of times, since this is the 7th pair I’ve knit. This time I used Plymouth Yarn’s DK Merino Superwash. The yarn has great stitch definition even in its DK version.

These are totally fun to knit. At one point in the cabling you need to use two cable needles. But don’t be daunted by that. It’s easy peasy. You will be putting one set of stitches on a front cable and another set on a back cable, and you simply work the cables in the order the pattern directs. The palms of the mitts are stockinette.

The instructions are arranged very helpfully, with both line-by-line and charts. Plus an extra chart tells you what round of the cable chart you should be on as the mitt progresses through the thumb gusset increases. Very useful for keeping a distracted knitter from goofing up.

Next is a new pattern to me, Nici Griffin’s Escape Mittens. I used the same Plymouth Yarn DK Merino Superwash.

The mitts took only 44 grams of yarn and worked up totally cute! They look kind of shrimpy off my hands. But even my large hands fit very comfortably in them because the stitch pattern is super stretchy.

Excellent pattern, very clearly written, with both charted and line-by-line instructions.

Sensibly, the palms of the mitts are smooth stockinette.

Today I’m apparently in a tell-it-in-purple world. The next pair is Clara Parkes’s Maine Morning Mitts. A freebie.

I didn’t think I had enough yarn to finish these in my purple leftover Queensland Brisbane, a lightweight bulky. So I started with wine colored Brisbane. It worked out rather cute.

Off the hand, these guys look a bit like two Saguaro cacti. Skinny. Ungainly. Prickly. But slip your hands into them and they stretch to wonderfully cozy.

You probably already know the little trick for keeping your ribbing color changes nice and crisp?  If you just join the new color and rib away the first round will have half ‘n half stitches (half one color, half the next) in the purl sections. But if you knit all the stitches of one round in the new color, and then start ribbing, you avoid the dreaded split-color purl stitches.

Yesterday it was 93 here. Today’s almost as hot. Much of the United States is suffering under dangerously high temperatures. And I’m writing to you about how to keep your hands warm in chilly weather. Think cool. Knit warm.

Red hat days

Recently I noticed that I’ve been knitting a lot of red hats. Not that it’s been red red red all in a row. But I looked over my “knits4blog” file and found an abundance of red hats that I’d not yet featured.

This first one is the great Wooly Wormhead’s freebie, Meret, left free to be a beanie instead of a beret. That’s just a matter of not blocking it as a beret. My Meret is knit in Malabrigo Rios in the Cereza colorway. It’s a rich red with undertones of almost black. My apologies if that sounds wine-connoisseur-silly (“woody, with a hint of apricot and mushrooms”). But then lots of us are yarn connoisseurs in this robust knitting universe.

I was a smidge disappointed that the crown decreases turned out rather porous. It’s not beyond the pale though that sometimes we might need an air conditioned beanie.

Next up is yet another version of Jesie Ostermiller’s Portsmouth Beanie. This is such an excellent unisex hat pattern. This time I knit it in Anzula’s For Better or Worsted. 80% merino, 10% nylon, and 10% cashmere. This is the Watermelon colorway. I’m pretty sure it’s the 10% cashmere that keeps me reaching for this hat when I’m looking for cozy.

I’m frugal enough that I very much enjoy knitting multiples of purchased patterns. Six dollars for three hats–with likely more in the future–would please even my rubber-band-saving grandmother.

What would especially tickle Gram is that I knit this version in yarn I frogged from a prior, less successful, hat. I unraveled the hat, wound the yarn onto my swift, tied it in a few places, and then steamed it. That did an excellent job of unkinking the yarn and saved me the trouble of washing and reskeining it.

Here’s another version of Galina Shemchuk’s excellent freebie, Just a Hat. It’s a somewhat new hat pattern that’s drawn a lot of attention with 450 project pages in just a few years. There’s a lot to like about the pattern. Unisex. Very forgiving size-wise. Tidy crown decreases. And free.

 

I knit my Just a Hat in Malabrigo Rios using the Desert Rose colorway. This hat seems to look especially nice knit in a yarn, like Rios, with shading and depth to make the hat’s furrows furrow just right.

This next hat is Hill Country Hat by Clara Parks, the only bulky weight in this post. It’s part of her “Knitters’ Book of Wool” but the pattern’s been released as a freebie.

I’ve knit Hill Country (ahem) eight times and already posted this hat’s predecessors. If you search on this blog you’ll find them all and be able to see the interesting stitch choices that make this bulky-weight a standout. What makes my latest version different is my unusual yarn choice: Lana Grossa’s Fusione. If you want to give it a try in this yarn, I’ll just wish you luck because it’s discontinued. Personally, I liked its 30% cotton, 26% alpaca, 25% wool, 19% nylon mix, for some purposes anyway. Very cozy. But I didn’t like it’s-time-to-take-out-a-mortgage price. And then I bumped into a huge markdown on the stuff and I was all in. This Hill Country wiped out my stash though.

Admittedly, not the best choice if you’re looking for stitch definition. But it will keep some head totally warm.

Last up is another Maria Socha beauty: Rioska. Mine is knit in Sugar Bush Yarn’s Bold, unfortunately another discontinued yarn. It’s a worsted weight with excellent stitch definition. I’ve often knit with solid shades of Bold. This was the first time I used a variegated shade: Rose Garden. I was concerned that the mock cable details would be overwhelmed by a too busy yarn. But I’ve decided that the result is excellent.

So pretty, including Socha’s trademark well-planned crown decreases.

More Doubles

Recently I’ve been fascinated with knitting doubles. I’m enjoying how the same pattern works up in different colorways or in different yarns. You’re looking at Alex Tinsley’s Fructose. I’ve knit both my Fructoses in Malabrigo Rios. These two colorways are big favorites of mine. The green one is lettuce. OK, you’d have figured out that’s the green one. And the purple/orange/red is Archangel. Beats me why. But it’s a wonderful colorway, especially for one-skein projects. That’s because there seem to be very big differences between skeins. But every skein I’ve seen is wonderful.

The strong vertical lines combine with strong horizontal ones to give the hat wonderful structure. And the sweet bonnet-like slit in the back leaves room for a pony tail or allows the hat to be worn low on the back of the neck to keep out winter’s chill.

Each Fructose took 52 grams. I should have had 48 grams left. But both my skeins were “light.” I’ve read that a skein with 10% more or 10% less is considered acceptable. I suppose I should be magnanimous and accept that if sometimes I get more I shouldn’t grouse about getting less. Maybe I would if I ever got more than a dollop of yarn beyond the ballband amount.   Both these skeins were shy about 8 grams.

With my mission of not wasting yarn or leaving it to languish in my oddments bags, I decided to knit up a pair of toddler-sized The Thinker hats.

Susan Villas Lewis has come up with such an excellent all-sized pattern. These are the 8th and 9th Thinkers I’ve knitted. In the toddler size, there are three lines of easy cable that ring this hat.

It’s a seriously excellent use of yarn.

That’s also true of Clara Parkes Hill Country Hat. Hill Country is a bulky-weight freebie available on Ravelry. It’s also included in Parkes’ excellent book The Knitter’s Book of Wool. Hill Country is another pattern I return to whenever I have about 110 yards of bulky asking to be knit up. This brown one is knit of Brown Sheep’s Lamb’s Pride Bulky.

One of the strengths of the hat is that, depending on the yarn and sometimes the colorway, it’s a definite unisex design. This white one is knit in Valley Yarn’s Berkshire Bulky.


As ever, hats don’t get beyond first base with me if they don’t have well-behaved crowns. Plus they get extra points if, like Hill Country, they have something interesting going on in the crown section. I think this swirl works well.

I knit this next pair quite awhile ago and didn’t get around to showing them off. This is Elena Nodel’s bulky-weight freebie, Tega. An excellent pattern. It’s only available in one size, adult, but that’s easily adjustable by using a less beefy yarn weight and smaller needles.

My first Tega is knit in Reynold’s Lopi Bulky. I used size 6 for the ribbing (that was pushing it) and size 9 for the body of the hat. Those extravagant cables are wonderful. And the thoughtfully planned crown is a winner for sure.

As for what head will wear a bulky-weight Lopi hat, it needs to be a very cold one. And a head with a very high “but it’s scratchy” threshold. I washed it in Eucalan to try to tame the itch factor, but not with much success. It’s much softer but still scratchy as heck. And I actually have a high tolerance for such rustic yarn.

If you decide to knit Tega in a good superwash bulky, like this Valley Yarns Superwash, there won’t be any complaints about itchy heads. The yarn also has great stitch definition for a bulky, which is a big plus for this pattern.

At some point, I promise, I’ll stop concentrating so much on heads and will let your eyeballs feast on something else. Not today though. I recently hatched plans for how my knit hats can tempt teens to put something on their heads and, with that, my hat knitting went into high gear. Even Glasshead is beginning to voice boredom with all these hats.

This one is Agnes Kutas-Keresztes’s freebie, Christian. My gray Christian is knit in about 130 yards of Berroco UltraWool.

And this pink one is knit in Plymouth Encore.

Crowns can make or break a hat. Check out this wonderfully organic one. If you’re up for an easy, rewarding (and free) pattern, definitely consider Christian.


Just when you think I can’t possibly be assaulting you with any more hat twins, I’ve still got more. This set is Susan Mills Harriet. Quite uncharacteristically, I knit my Harriets in exactly the yarn the pattern calls for: Classic Elite’s Liberty Wool.

The multi-color Liberty Wool means that every Harriet will be unique. My 50 gram balls weighed closer to 40 grams, which was a disappointment. But two balls still ended up with two Harriets, just one large and one medium.

The hat is meant to be a beret. But I think most heads would want to wear it as a beanie.

I made some sizing modifications on this next pair of hats, but I am totally liking the look. It’s Benjamin Matthew’s On the Grid Beanie. I was lucky enough to secure a copy of the pattern during its few days when Matthew released it free. But this hat pattern is totally worth the 6 dollars he’s charging for it now. By the way, to keep an eye on designer short-term freebies, join the Free Stuff Rocks (f/k/a Lovin’ the Freebies) group on Ravelry. The group forum will also alert you to new forever free patterns and to discounts that are available from designers.

Back to On the Grid. Both mine are knit in Plymouth Encore. The pattern calls for a more lightweight worsted and 19 stitches to 4 inches using garter stitch as the gauge. Encore required some sizing mods.

I knit 10 rows of ribbing. In Encore, needle size 6, that was about 1.5 inches. I knit 4 repeats of the triangle pattern instead of 5, which gave me a bit over 6 inches of triangles. From the start of the decreases to the top added about 2.75 inches. So, even modified, this is quite a long beanie–9.25 inches. But I can already tell that this quick knit is a pattern I’ll return to regularly.

You know that means it’s got an interesting crown.

GlassHead is weeping. Maybe you can hear her? Both Fructose have already been given away and she wanted to hang on to the Lettuce one and keep wearing it for awhile. I’m consoling her at present with the Encore Sour Apple On the Grid, a similar colored hat.

 

KBOW’s Comfy Cardigan

I don’t knit many sweaters. And when I do, they aren’t usually for me. But I was drawn to Pam Allen’s Comfy Cardigan from Clara Parkes’s Knitters Book of Wool. A friend knit it and recommended that it was one of her most comfortable sweaters. I’m a fan of slipped stitch and the honeycomb pattern of the bodice looked like it would be fun. It was. Twice.

First, I decided to modify the pattern to make it larger by adding honeycombs. Hmm. It seemed like a good idea, but before I was done I had a sweater with a 79 and 1/2 inch chest. That’s about two Dolly Partons and would not do. In my own defense, the sweater is unusually constructed and I did not understand exactly where I was in it most of the time. You start in the middle of the back with a provisional cast on and work to the edge of the back. Then you make a similar piece for the front. You join the pieces, and that’s where the sizing change occurs. Knit for a bit, cast off for the sleeve cut-out and then knit down to the cuff. Now back to that mid-back provisional cast-on and knit all the same sections for the other side. You pick up hundreds of stitches at the bodice and knit until it’s the length you want. A bit of ribbing, and you’re done.

After my Dolly Parton sojourn, I ripped back almost to the beginning and began again. This time I followed the pattern exactly, for the largest size. I was about 1/2 stitch per 4 inches above gauge, which ended up working out fairly well for me size-wise.

Maybe because of the somewhat lightweight worsted I used, Berrocco’s Vintage, this doesn’t have quite the “body” that might be best. The feel of it is soft and quite nice. But it isn’t doing too well with its rather dainty buttonholes, buttonband, and ribbing. Despite steaming, the buttonband and ribbing is curling some. I will tackle it again with more aggressive steaming.

Rather than shop for the perfect buttons, I used some nice wooden ones I had in my stash. They’re a bit too beefy and I’ll probably swap them out soon for something more lightweight. I’d like the sweater’s honeycomb pattern to catch the eye, more so than my button choice.

This turned to be a rather quick knit, as sweaters go. True to it’s name, it’s very comfy. The side-to-side construction assures that nothing binds.

Another Hill Country Hat

Hill Country Hat is included in Clara Parkes Knitters’ Book of Wool and Parkes has generously released it as a free pdf on her Knitters Review website. This is my third time knitting the pattern, shown here again in Brown Sheep Lamb’s Pride Bulky. 85% wool, 15% mohair, in a wonderful palette of 98 different colors.

This pattern knits up lickety-split, at 4 stitches to the inch. I (basically) got gauge with 10.5 needles. One skein was all I needed, even though I made one extra repeat of the Hills and Valley pattern, knitting 16 rather than 12 rows in the body of the hat before beginning the crown decreases.

Cold weather is bound to come to Michigan soon. A day here and a night there just won’t do. This hat will keep all heads toasty as can be. In fact, I may wear this to the dog sled races at Clear Lake State Park this weekend. The Mid-Union Sled Haulers (M.U.S.H.) will be racing as long as there’s enough snow on the ground and the weather conditions are proper to allow the dogs to work safely.